Type 2 Portable Charger – 22 kW

The Type 2 Portable Charger 22 kW is designed for safe and practical charging of electric and plug-in hybrid vehicles on a suitable three-phase electrical installation.

Fitted with a Type 2 vehicle connector, the charger connects to the mains via a red CEE 32 A industrial plug. On a three-phase connection it delivers up to 22 kW of charging power. Actual charging power may vary depending on the vehicle's on-board charging capacity, the electrical installation and operating conditions.

The charging current can be set to 10 A, 16 A, 22 A, 24 A or 32 A. With the delayed start function, charging can be scheduled to begin 2, 4, 6 or 8 hours later.

Voltage, current, power, temperature, charging time and operating status can be monitored on the 2-inch LCD display. The 5-metre cable gives you room to move between the vehicle and the power connection.

With IP55 protection and multiple electrical safety functions, it is suitable for use in garages, car parks, workplaces and when travelling. It can be used as a portable unit or kept on the wall bracket.

Key Features

• Type 2 vehicle connector
• Charging power up to 22 kW
• Three-phase operation (440 V AC)
• Red CEE 32 A industrial plug
• 5 m cable
• Adjustable current from 10 A to 32 A
• 0 / 2 / 4 / 6 / 8 hour delayed charging
• 2-inch LCD information display
• IP55 water and dust protection
• Plug-and-play operation
• Suitable for portable use or with the wall bracket
• Multiple electrical safety protections

Technical Specifications

• Product type: Portable electric vehicle charger
• Vehicle connector: Type 2
• Mains connection: Red CEE 32 A industrial plug
• Phase: Three-phase
• Maximum charging power: 22 kW
• Voltage: 440 V AC
• Frequency: 50 / 60 Hz
• Maximum current: 32 A
• Adjustable current: 10 A / 16 A / 22 A / 24 A / 32 A
• Cable length: 5 m
• 2-inch LCD screen
• Displayed information: Voltage, current, power, temperature, time and charging status
• Timer: 0 / 2 / 4 / 6 / 8 hour delayed start
• Protection rating: IP55
• Operating temperature: -25°C to +50°C
• Operation: Plug-and-play
• Use: Portable or with the wall bracket

Safety Features

• Residual current protection
• Overcurrent protection
• Overvoltage protection
• Undervoltage protection
• Overtemperature protection
• Earthing (ground) check
• Overload protection
• Short circuit protection
• Three-phase current control
• Residual current transformer
• IP55 water and dust protection
• Flame retardant casing
• Low-heating magnetic latching relay

Package Contents

Type 2 portable charger, carry bag and wall bracket.

Compatible Brands and Models

Vehicles with a Type 2 charging inlet.

Usage note: To use the full 22 kW charging power, the electrical installation must be three-phase and able to carry a continuous 32 A load, and the vehicle's AC charging capacity must support 22 kW. We recommend having the installation checked by a qualified electrician before use.